PDA

View Full Version : Nissan GT-R can't take aftermarket wheels & Japan unapproved race tracks are out


ATLsupra
02-08-2008, 06:21 PM
Motor Trend's Scott Kanemura sat down with Michizio Niikura, the president of MINE'S Motor Sports, the first aftermarket firm to get its hands on the new Nissan GT-R. The conversation centered on the roadblocks Nissan has put in place to stymie high speeds and limit modifications to the GT-R.

We've previously reported on how the GPS system fitted to the GT-R would remove the 111 mph (180 kph) speed limiter when the car arrives at a track, but according to Niikura, it will only work on pre-approved racetracks. However, the GPS sensor doesn't automatically remove the limiter by itself, it has to be manually changed by navigating through a series of menus on the GT-R's touch screen. While having to go to a Nissan-approved track is daft in its own right, it's even worse when you leave. After the track day, owners are required to head on over to a Nissan High Performance Center where a $1000 safety check is performed. Don't do it and the factory warranty is void.

Another rumor that began circulating after the Tokyo Auto Salon has also been confirmed: aftermarket wheels are out. Supposedly, all the GT-Rs on display at TAS had to be driven in on the stock rollers, jacked up and then fitted with the tuner's chosen wheels. Due to a sensor mounted on the valve stem, if the GT-R is driven with aftermarket rims, an error code is thrown on the dash. And although MINE'S has fitted a custom exhaust to their shop car, they've found that any modification to the intake system causes the ECU to go haywire.

While all these findings are disturbing draconian, GT-R owners here in the U.S. won't have to worry about the speed limiter/track day issue. Nissan has said that the GPS system won't be implemented here in the States, but the future of tuning the GT-R remains questionable. Top tip Zac!

http://www.autoblog.com/2008/02/07/nissan-gt-r-cant-take-aftermarket-wheels-unapproved-race-track/

wraith
02-10-2008, 10:20 PM
Damn, that is disturbing news :(

I hope GT-R's destined for the Australian market also have the speed limiter taken care of.....

Very clever regarding the wheels, they are a fine set of mags, but I for one would've probably wanted to change them, just to make my GT-R a little more personalised and unique.

I hope it's just a matter of time though, that all the blocks are figured out and mods can be done successfully to this car.

theTTshark
02-17-2008, 09:09 PM
Although this news is a set back for the tuning industry, I still think the big tuner companies just need to be given a few more months to get used to all the road blocks.

AdamSupra
02-18-2008, 07:02 AM
I am sure Mine's will get past all this. They always crack the ECU's !!!

ATL-Porsche
02-18-2008, 11:39 PM
if someone can build something to "block" tuners.. someone can build something to unblock it. It can and will happen.

smokinxtreme
02-19-2008, 02:23 AM
if someone can build something to "block" tuners.. someone can build something to unblock it. It can and will happen.

+1

OdyOwnage
02-19-2008, 12:23 PM
That is pretty sad news.

I am sure that there will be a method to get around it though.