Okay Peps Front Clears Went In Like A Beaut, Now How The Hell Do I Put In The Rears?

[BennyBlanco]

UM ANYONE do it yet?

cause im sitting here like WTF

[BennyBlanco]

PS i just found out that fronts have a bulb and rears are just the clear reflectors in case no one new like me

[Adrey]

I did swapped out all four the same day i got the car. To do the rears you have to remove the bumper. Also i swapped the led lights from the US spec to the JDM clears. Now i have a clear markers with lighting on them.

[JeremyBlackwell]

Hey. WE have a pictorial write up on an installation we did for these markers, and will have it up ASAP here in the installations forum.

[BennyBlanco]

thanks Jeremy that would be cool

[BennyBlanco]

any follow up on this yet Mr Blackwell

[JeremyBlackwell]

Trying to finish correcting the installation system, so please bear with us. If you need tech support immediately, feel free to call and one of our techs can answer any questions you have about removing the rear bumper. THanks

[BennyBlanco]

no its cool i can wait
thanks man

[DarinF]

Yeah the rear ones look like a PITA. Please any pics and points.steps to taking that rear bumper off would be nice. I looked at it tonight and just dont have the energy :p

[Adrey]

Yeah the rear ones look like a PITA. Please any pics and points.steps to taking that rear bumper off would be nice. I looked at it tonight and just dont have the energy :p

Darin, i did mine. pm me and ill give you my # so you can call me. i will let you know how its done.

[Adrey]

you will need to remove the bumper. here is mine removed. you first remove all interior panels from the trunk (remove all clips) to access the rear lights 10mm nuts. you will have 3 on each light. Then remove all clips from under the rear of the cars bumper. There are about 10-15 i don't remember exactly how many. Then go to each side behind each wheel well and behind the liner you will have 3 (10mm) nuts remove these. Now the bumper will pop out. make sure to disconnect the rear lights/and license plate connectors so you can have full access of the bumper.

[DarinF]

Adrey you rock! I see on top of the bumper near the lights there seems to be some type of darker clips/fasteners.. or am I seeing stuff? Does the top part of the bumper lock into clips or anything above the lights? If its just 6 bolts and 3 bolts bottom plus snaps this seems straight forward.. just want to avoid pulling on clips and breaking them up top!

[Adrey]

Adrey you rock! I see on top of the bumper near the lights there seems to be some type of darker clips/fasteners.. or am I seeing stuff? Does the top part of the bumper lock into clips or anything above the lights? If its just 6 bolts and 3 bolts bottom plus snaps this seems straight forward.. just want to avoid pulling on clips and breaking them up top!

They are just clips that hold the top of the bumper in place and centered. They just pop off.


btw, i need instructions on removing the bottom gray area of the bumper to have them painted..

[BennyBlanco]

WoW thats some work

[Adrey]

WoW thats some work

it looks to be alot of work but not bad at all. If anyone is located in south florida and needs this done, i will do the work for you.

[BennyBlanco]

can i fly you to UTAH and you can do it for me LoL